16 March 2009

Left Magneto Breaker Points


As mentioned previously there was an intermittent problem with the left magneto on the 206 which ended up being a nice little project for me while it was down for its annual inspection.  Upon taking the left magneto apart it was clear what the problem was.  The capacitor appeared to have been faulty at one point creating some pitting on the breaker points.  The points were not being allowed to separate from each other allowing the voltage in the primary circuit to go to the secondary which is in turn where the spark is created at the plugs.  After trying one of my freshly produced business cards out on the points to remove what looked to be a grain of sand it was apparent we needed some new points.  I never would have thought this would have happened considering the low time on the engine, but it was yet another great learning experience with Servant Wings as I prepare to get out in the field.
Unlike at A&P school, now I had to re-time the magneto, and fly it away.  There is something pretty awesome about that which I am still trying to put my finger on.  I guess just in general the whole mechanic thing has really grown on me.  I have said it once and will more than likely say it again because of my previous relationship with a wrench and tools in general.  Speaking of tools I need to go clean some...

 

1 comment:

  1. Common problem with those capacitors on the 206...I've changed a lot of those. Good project!

    ReplyDelete